Friday, January 22, 2010

Space Terrain- Planets and Moons

This planet was created by coating a styrofoam ball used in floral arrangements in a PVA/water mix about 3 times. This part takes a long time because you have to wait for the glue to dry. I then attempted to spray the ball a deep orange color, but the ball was still too porous and the paint couldn't hit most of the openings. I ended up brushing it orange instead. In my opinion, it is NEVER worth the time and effort to seal in PVA in order to prime somthing. Just brush prime anything that can be damaged by aerosol and then spray prime. You'll save time and headaches.


I then drybrushed red and light orange bands on the planet. I also drybrushed some clouds onto it. The drybrushing has to be done carefully to get a good blended look and to make sure the coverage is complete as well. I then assembled a large flight stand, painted it black and jammed it into the bottom of the planet. I then pulled the base out, filled the hole with PVA and put the base back in. Finally I sprayed the piece with a sealant.


The moons were made by drilling a hole in a ping pong ball large enough to put a flight stand in. Then just superglue the ball to the stand and prime the whole thing black. Touch the flight stand up if you want to.


The difficult part was trying to get the moons to look like moons without having to paint individual craters on them and such. I blotched various shades of greys and white on the ping pong balls.



I was commissioned by a person years ago on Bartertown to create four more planets a game called "StarBlazers."



Earth and Saturn

These two planets were probably the most challenging due to the fact that the real bodies have a very distinct look to them. These two planets are based on styrofoam floral balls. Earth was basecoated blue, and the continents were painted in with brown. Green was dabbed onto the land masses as well. Ice caps and Antarctica were painted in white, and white was drybrushed over the entire ball to simulate cloud cover.


Saturn was done in a similar fashion, being basecoated yellow and bands of various shades of brown and yellow being drybrushed onto the planet.


Saturn's Rings

This was by far the most challenging part of the project. I wanted to make the rings out of something thin, yet sturdy. I also wanted to minimize cutting on the rings as to keep them as round as possible. I started off with clear plastic, but it did not hold up well and coloring it was quite difficult. A friend of mine suggested using an old record and drybrushing the ridges.


I purchased a couple from Goodwill and tried to drybrush one, but the ridges were too fine. They were also hard to cut and I ended up shattering the first record.

Finally I used a dremel to cut the center out of the record and used the bands on the record to hand paint the rings on. It was very plain, so I mixed a new batch of paint with very fine sand and painted the rings again. I then drybrushed the rings a tan color. It's still not quite what I was looking for, but I think they look good.


Mercury and the Lava Planet

These two planets were based on balls as well, but they were coated in wall filler. Mercury was based on an old cat toy I had lying around. I taped all of the holes in it shut and gave the ball three coates of wall filler, applying each new coat after the last had dried. The ball was sanded fairly smooth once dry and a dremel was used to carve the craters into the surface.


The lava planet is based on a foam floral ball. Wall filler was applied with a brush and some sticks to give the planet a rough, young and seizmically active appearance. Deep cuts were also made into the filler for deep lava flows.


Both planets were base coated black. The lava planet's cuts were then painted red and drybrushed orange, then yellow. Both planets were drybrushed from a dark grey to light grey to white.


Modular Board- More Pictures

I have a ton of pictures of this board, and I will make you look at them all!!  I mean share them!



























Tuesday, December 29, 2009

Modular Board


This is the largest project I have undertaken yet. The idea was to create a board to enter into a prize competition at a local gaming convention called ReCon held by the Minnesota Miniature Gaming Association. We missed the July deadline but managed to get the board done for ReCon in October. The board was now part of the "Farewell to 40K Tour," celebrating the release of 4th edition.

The board is based on 1 3/4 styrofoam glued to 1/2 plywood with Liquid Nails. The board is divided into 2 4' x 4' sections. More descriptions of the various aspects of the project are below.

The wall sections are 2" thick blue styrofoam with seperate buttresses glued into place. Each wall section is 6" wide and 8" tall. The doors are simply foamcore with bamboo skewers as hinges. The front bunkers are also foamcore construction. The tank traps are plaster casts of ice cube trays. The barbed wire is wire fencing twisted together; the posts simply chopsticks. Other battlefield items are battlefield accessory bits, dollar store figurines smashed to pieces, model railroad trees and copper fittings as barrels.


In the background can be seen the canyon and the top of the castle gate. The canyon was made by building up and interior skeleton with foam offcuts and then glueing bark chips to the outside with cheap caulking. The castle is a Cinderella Dream Castle I picked up at a garage sale for 10 cents. More railroad trees top the canyon.


Here is a back view of the board and castle with some old- school Khorne Berzerkers hanging out. Some slight modifications were made to the castle...


Two of the towers were removed and the holes in the floor filled in so figures could stand in them. The pillars were replaced with wedding cake pillars, and dollar store cherubs were added to various locations. The balcony was also lined with plactic skull rings. An imerial eagle pin was added to the front above the drawbridge.




The trenches were cut into the foam base. Balsa strips were cut from a large sheet for a rough look and glued into place. Matchsticks were used to build the walls.


The barrels (left side of picture) are copper plumbing fittings with end caps cut from card. Caps were made by punching card disks with a leather punch.

The tank traps were cast from a square ice cube tray in plaster of paris. they were glued into place and then distressed with a knife and a Dremel.


The barbed wire was made by cutting lengths of wire fencing so it was a wire with pointy cross pieces coming off of it (kinda looks like this HHHHHH) The lengths were then folded in half to decrease the spacing between "teeth" and then the wires were twisted together to cause the "teeth" to stick out in random directions.

There is also the sliding door and busted pieces from a floppy disk as battlefield debris.

Here is a shot of the space between the gates. There are more plaster tank traps, with some dollar store figurines as statues. The ruin is made from plastic ruins exactly as the Ruined Corner was.

The doors for the second gate are decorated with more cherubs and skull rings.

The trench-section of the board is covered with coarse sand drybrushed from black to brown to tan. The road is fine terrarium sand painted black and drybrushed grey. The other stone and concrete pieces are drybrushed with various stages of grays and white. The castle was drybrushed from black to white. The treches were drybrushed from black to dark brown to burnt sienna to tan.




The remaining areas were covered with various grades and mixtures of flock.

This picture is of the space between the castle and second gate. The angels are simply dollar store items glued to wedding cake pillars.


Monday, December 28, 2009

Minefields

I started off by cutting the bases out of corrugated cardboard. I then used tape to cover the edges and hide the corrugation.

I then decided on what I wanted on each of my minefields. I decided that my minefields would be sodded over with grass to better hide the mines. As far as details were concerned I decided to create the following 5 minefields:








The mines themselves were made by stacking 2 game chips on top of each other and using a round piece of sprue as the trigger. One company suggests using shields from their fantasy models, but these chips were smooth and about the same size at their shields, and a lot cheaper, too!

The blasted statue is a dollar-store figure I got in bulk on ebay. I just broke it apart with a pliers and glued it into place.

The fence was created by glueing down lengths of chopsticks for the posts, then using some wire fencing material for the fence.

After everything was glued into place, I used a watered down solution of PVA glue to stick some sand onto the minefields to represent areas where grass wasn't growing or had been blasted away. I just used a brush to apply the PVA to different areas, and sprinkled sand onto the glue.

I always let the glue dry BEFORE tapping the excess sand or flock off of a piece. It seems to let the sand/flock soak up more glue and covers better.

Once the sand was dry, the pieces were primed with a black undercoat. The mines and fences were drybrushed silver, the statue was drybrushed with a dark grey working into a white, and the fenceposts and exposed earth were drybrushed from a dark brown to a tan color.

After painting, a mix of PVA/water was brushed onto the minefield bases and then the bases were covered in flock, just like with the sand. In order to cover the mines well, two layers of flock were applied. Once the last layer of flock was dried, a final coat of PVA mix was applied to the minefields. This turned the flock rock-hard and keeps the flock from falling off during gameplay.

Light Up Teleporter

This piece was inspired by the Games Workshop Warhammer 40,000 Necrons. We were going to use it as the ultimate objective in a campaign we planned. We got the entire campaign set up, my friend rigged it to his favor and no one showed up. It was great.


This teleporter was built from the top of an X-Men playset and the following items:

3/4" expanded styrofoam
Cardboard for the base
Fine and Coarse flock
Plastic ferns
Foamcore

I cannot find a picture of this playset, but it was the hand and torch of the statue of liberty. In place of the flame there was this device on top.  If anyone can find a picture I would appreciate the help.

The piece is based on a 12" x12" piece of corrugated cardboard (not my usual double thick stuff either!) Masking tape was still used to hide the corrugations, however. The X-Men playset was the Statue of Liberty torch with the three arm mechanism on it. I've never seen the movie so I have no idea what it's supposed to do, but the toy lit up and spun around. For about 5 minutes, anyway. Then it broke. The playset was dissasembled, the wires for the lighting were maintained and a little rewiring was required to get the three- armed mechanism to work outside of the playset.

The styrofoam was cut into squares to form the pyramid, and a hole was cut in the top two layers to accomodate the teleporter aka three- armed mechanism. A hole was bored through the other layers and a notch was cut out of the bottom layer to accomodate the wiring and on/off "switch" for the teleporter.


A piece of foamcore was cut into a circle and engraved with a symbol using a blunt pencil. It was then pressed into the bottom of the teleporter.

I then taped off the lights in the teleporter and base coated the styrofoam pyramid black. I then spray primed the entire piece black. The teleporter was lightly drybrushed silver and the pyramid was drybrushed dark grey up to white. The base was painted green. The symbol was repainted black and green was carefully poured into the groove of the symbol.


Course flock was glued on with PVA to look like creeping jungle growth and the base was flocked with fine green flock. Some plastic ferns were glued on with PVA, but most fell off. That's ok, they looked like they were dieing compared to the other foilage on the piece.

The switch is just a straight piece of wire that is pushed into a loop of wire to complete the circuit and make the teleporter light up. I ran this thing for 3 hours solid one day and the batteries are still holding up.

Lemax Collection Mill Stream

This steam was purchased at a DIY store after Christmas time. The set consists of two Mill Stream sets and one Mill Stream Fork set. The weeks following Christmas and Halloween are a great time to pick this stuff up for next to nothing. As the store I went to was already picked through, I had to bite it and get this stuff for only 70% off before it was gone. Click pictures for a larger view.

The Mill Stream set claims to come with 11(!) pieces. Six of those are little, snow- covered pine trees, two are end caps for the stream and only three are acually river pieces; two straights and one bend. The fork comes with 10 pieces; 6 trees, three caps and 1 fork piece. They are cast in a hard resin or plastic and are fairly heavy and durable. Each piece also has little felt pads on the bottom so they don't scratch or damage your gaming board (or whatever.) Each piece is about 1/2" thick and when all three sets are combined together they stretch just over 4 feet.

Unfortunatly it came with a snow finish. That had to go.

These shots are the pieces before painting. As you might be able to see, the banks of the river are big rocks and boulders covered in snow. There are also tree stumps and branches dotting the banks. The water portion is sculpted to look like moving water, painted and then coated with a clear coat of some kind. The coating is quite soft and sticky and picks up fingerprints easily.


All snow covered areas, tree stumps and branches were hand painted black. The rock and water areas were left as- is. The tree stumps and branches were drybrushed first with a dark brown, then a brown- grey mix and finally a light grey.


White glue was used to adhere the magic ground cover mix to all of the black painted areas. A mix of green course turf and brown fine turf were then applied sporradically on the pieces to break up the uniformity.






The project was simple enough and though it was a bit expensive than I would traditionally have spent on terrian (around $25), it is still cheaper than purchasing a river or stream specifically made for wargaming.