This terrain project is a second attempt at usable terrain for Games Workshop's Necromunda game. My first set was large, ugly and completely incompatible with the carboard and plastic stuff put out by GW so it was disassembled and all pictures removed from the website due to a confrontation with a GW lawyer- type thug.
This second project has been designed to be completely compatible with the the GW set. All towers are 3" high to match up with the bulkheads in the GW set. Click pictures for a larger view.
The Platforms
The core of the collection is 15 platforms. They are all based on half of a metal tin AOL sent their junk CDs in for awhile. On top of these a bottle or container of some type (mostly saline and shampoo bottles) were glued to the center. These were measured so the platform plus the bottle were 3" high. Each of these will be stacked on top of each other to create the dizzying underhive.
On each side of the platform a set of holes were drilled 1/4" off each side of the center. A piece of wire was then bent into a "U" shape and run through the holes. The ends of the wire were then turned up to create hooks where ladders and bulkheads could be hung from to allow the set to be as flexible as possible.
On two opposite corners of each platform a 90 degree K'Nex adaptor was glued in place. A set of K'Nex rods were cut to size. These rods will connect the stacked platforms together to stabilize them during gameplay. They also add to the idustrial pile- 'o- crap look of the underhive.
Various pieces from model kits and my bitz box were glued on the tower portions to give them a suitable industrial look. Also, bits of thin card were cut from old VHS video boxes and glued onto the towers. Seed beads were glued on with super glue for rivets. Many of these started falling off right away. The super glue marks kind of looked like rivets so they were left as- is. The rest of the rivets were punched from plastic food container lids with a leather punch.
Ladders and Bulkheads
The ladders for the project were simply HO guage railroad tracks with the rails removed and cut to size. Holes were drilled in each laddersto it could be hung from the platforms.
The Bulkheads are 3.5" floppy disks that were split in half and then glued back together inside out. 1/2 inch was trimmed off the bottom of each one and a couple holes drilled towards the top so they could be hung from the platforms.
The ladders and bulkheads were primed black. The ladders were simply drybrushed silver. The bulkheads were base coated either silver, blue or green, then given various black, brown and burnt sienna washes to dirty them up. The were then drybrushed to bring out what little detail there was.
Just some of the models, terrain, games and other random stuff I've been working on.
Wednesday, July 14, 2010
Two Story Fortifcation
The first thing I did is cut out the shape of the hill I wanted the bunker mounted into from a piece of 1" insulation foam. I then traced this shape onto a piece of cardboard. This acts as the floor of the bunker and keeps it connected to the hill.
I then cut out a notch from the foam to accomodate the bunker. In this case it is a 3"x3" square. This starts at the very edge of the hill and goes in. Once the bunker was cut out of the hill I glued the cardboard base in place. I forgot to cover the corrugations with carboard as you can see in the picture. Don't forget to do that!!
All of the corrugated steel is made from corrugated paper. You can buy it by the roll. I got mine at a dollar store.
A 3" x3" square was glued to the carboard base to serve as the floor for the bunker. White glue was used, and it soaked the paper backing off of the corrugated paper. Clamps had to be used to keep the paper down while drying. Two strips were cut and glued along the inside of the hill; one facing out and one facing in. These formed the walls of the lower story.
Chopsticks were cut to length and superglued into each corner to support the upper level.
A 3" x 3" square of cardboard was cut for the upper level. This was centered over the posts and glued into place. Glueing the upper floor in place was a huge mistake. Now it's nearly impossible to get models into the lower level.
Corrugated paper was glued to the base of the upper floor. A thin strip was also glued around the front three side of the upper level. This would give the upper wall something to be attached to.
The surrounding wall on the upper level is constructed the same way as the wall for the lower level. An HO scale model railroad trask was used for a ladder. The rails were pulled off with a plier and then it was cut to length.
The piece was primed black (the hill brushed, the rest sprayed.) The corrugated steel was drybrushed dark green to a lighter green. The ladder and posts were painted like wood; starting with a dark brown drybrush up to a light brown. The hill was drybrushed up from dark grey to white.
Static grass was glued to the top of the hill and the piece was complete.
I then cut out a notch from the foam to accomodate the bunker. In this case it is a 3"x3" square. This starts at the very edge of the hill and goes in. Once the bunker was cut out of the hill I glued the cardboard base in place. I forgot to cover the corrugations with carboard as you can see in the picture. Don't forget to do that!!
All of the corrugated steel is made from corrugated paper. You can buy it by the roll. I got mine at a dollar store.
A 3" x3" square was glued to the carboard base to serve as the floor for the bunker. White glue was used, and it soaked the paper backing off of the corrugated paper. Clamps had to be used to keep the paper down while drying. Two strips were cut and glued along the inside of the hill; one facing out and one facing in. These formed the walls of the lower story.
Chopsticks were cut to length and superglued into each corner to support the upper level.
A 3" x 3" square of cardboard was cut for the upper level. This was centered over the posts and glued into place. Glueing the upper floor in place was a huge mistake. Now it's nearly impossible to get models into the lower level.
Corrugated paper was glued to the base of the upper floor. A thin strip was also glued around the front three side of the upper level. This would give the upper wall something to be attached to.
The surrounding wall on the upper level is constructed the same way as the wall for the lower level. An HO scale model railroad trask was used for a ladder. The rails were pulled off with a plier and then it was cut to length.
The piece was primed black (the hill brushed, the rest sprayed.) The corrugated steel was drybrushed dark green to a lighter green. The ladder and posts were painted like wood; starting with a dark brown drybrush up to a light brown. The hill was drybrushed up from dark grey to white.
Static grass was glued to the top of the hill and the piece was complete.
Labels:
28mm,
40K,
Flying Lead,
Modern,
Sci Fi,
Structures,
Terrain,
Wargaming,
WWII
Tuesday, July 13, 2010
Technobridge
I picked up this Armorcast piece for a song at a local hobby shop. It is cast in resin and is a very nice piece. There is lots of detail, and cleaning was quite simple. The piece was primed black and then painting began.
I started off by drybrushing the entire piece silver, but seing that is was going to end to way too plain, even after detailing, I decided to do the edges in hunter green. The wooden parts were painted a very dark brown. Areas that were damaged were left silver, and a thin line of black was painted where the silver meets the green to give the effect of chipped paint.
The entire piece was given a wash of a mix of black paint, water and Future Floor Finish.
Once this was dried the silver parts were gently drybrushed silver again. The wood was drybrushed dark grey, then light grey. The green was lightly drybrushed again with Hunter green, then a slighly light shade was applied by mixing white in the base color.
The rust effects were then added. Surface rust was added simply by stippling burnt sienna over areas of the bridge. The rust streaks were done by loading a brush, removing some of the paint, then gently working it down the slope in long strokes. Citadel Blazing Orange was then lightly stippled onto the flat areas of burnt sienne, and streaked the middle of the runs.
I started off by drybrushing the entire piece silver, but seing that is was going to end to way too plain, even after detailing, I decided to do the edges in hunter green. The wooden parts were painted a very dark brown. Areas that were damaged were left silver, and a thin line of black was painted where the silver meets the green to give the effect of chipped paint.
The entire piece was given a wash of a mix of black paint, water and Future Floor Finish.
Once this was dried the silver parts were gently drybrushed silver again. The wood was drybrushed dark grey, then light grey. The green was lightly drybrushed again with Hunter green, then a slighly light shade was applied by mixing white in the base color.
The rust effects were then added. Surface rust was added simply by stippling burnt sienna over areas of the bridge. The rust streaks were done by loading a brush, removing some of the paint, then gently working it down the slope in long strokes. Citadel Blazing Orange was then lightly stippled onto the flat areas of burnt sienne, and streaked the middle of the runs.
Labels:
28mm,
City Board,
Flying Lead,
Industrial,
Model Kit,
Necromunda,
Sci Fi,
Structures,
Terrain,
Wargaming
Tank Traps
Another important piece of terrain for wargames is the tank trap. They trap tanks. Or at least keep them from driving where ever they want, until the traps are destroyed. Click on pictures for a larger view.
A standard scenario calls for up to six sections of traps so I created six. These were based on 3" x 6" sections of foam core (no cardboard today, kids.)
The hedgehogs were created by glueing plastic "I" beam rods together in an "X" shape . I mounted three traps per base. After the traps were built, they were hot glued to the bases. I then primed them in a oxide red.
I used these traps hours after I had primed them, and three of them broke off the base during transport to the local gaming shop. two more broke off while we played. Hot glue was NOT the thing to use here. When I got back home, I tugged at each trap still attached to its base to see if it would come off. If it did, I superglued it back on. After making these repairs I covered the bases in the PVA mix and covered them in sand. As soon as the glue was dry, the pieces were basecoated black (I didn't care for the red oxide color.) Painting was done by drybrushing the traps silver, and drybrushing the bases in a medium brown and a tan. I was tired of looking at these things and just wanted them done.
All I need to do is seal them, which I will do with a spray sealant. I just hope the sand won't start breaking off. If it does, I'll coat the bases in PVA, just like my flocked pieces.
These dragon teeth style tank traps were made from plaster poured into an ice cube tray. Once the plaster cured they were knocked out of the tray and attached to strips of foamcore with white glue. They were then primed black and drybrushed dark grey to light grey to white. A sickly green static grass was mixed with some dried tea leaves and applied to the base with white glue.
A standard scenario calls for up to six sections of traps so I created six. These were based on 3" x 6" sections of foam core (no cardboard today, kids.)
The hedgehogs were created by glueing plastic "I" beam rods together in an "X" shape . I mounted three traps per base. After the traps were built, they were hot glued to the bases. I then primed them in a oxide red.
I used these traps hours after I had primed them, and three of them broke off the base during transport to the local gaming shop. two more broke off while we played. Hot glue was NOT the thing to use here. When I got back home, I tugged at each trap still attached to its base to see if it would come off. If it did, I superglued it back on. After making these repairs I covered the bases in the PVA mix and covered them in sand. As soon as the glue was dry, the pieces were basecoated black (I didn't care for the red oxide color.) Painting was done by drybrushing the traps silver, and drybrushing the bases in a medium brown and a tan. I was tired of looking at these things and just wanted them done.
All I need to do is seal them, which I will do with a spray sealant. I just hope the sand won't start breaking off. If it does, I'll coat the bases in PVA, just like my flocked pieces.
These dragon teeth style tank traps were made from plaster poured into an ice cube tray. Once the plaster cured they were knocked out of the tray and attached to strips of foamcore with white glue. They were then primed black and drybrushed dark grey to light grey to white. A sickly green static grass was mixed with some dried tea leaves and applied to the base with white glue.
Labels:
28mm,
40K,
Accessories,
Flying Lead,
Modern,
Sci Fi,
Terrain,
Wargaming,
WWII
Styrofoam and Wall Filler Buildings
These two pieces are some of my earliest attempts at making terrain. They use some pieces of styrofoam glued together and some wall filler material to create a quick and easy structure for wargaming. The first piece is a simple building. It was created by using two pieces of styrofoam used to package some kind of electronic device, but I can't remember what. The two halves were simply glued together with PVA and allowed to dry. The outside was then covered in some pre-mixed wall filler compound and slightly smoothed out.
Once the filler was dry, it was sanded down to get rid of any sharp edges or peaks that might be on the piece. A door was made in the front out of card and a handle was taken from a tank model. A thing was glued onto the piece and a couple of straws were also glued on as exhaust ports.
The building was brushed black and drybrushed a dark grey, light gray and finally white. The door, exhaust ports and thing were drybrushed silver. This piece is so stable and strong it wasn't even based.
The second piece is a small bunker I built from offcuts of styrofoam from making hills. It is based on a square of foamcore with masking tape around the edges to hide the foam in the foamcore. The bunker itself is made of "bricks" of styrofoam glued to the base with a removable roof.
The bunker was also coated in wall filler, but a brush was used after application to give the bunker a formed concrete look, much like that on the highways and interstates (at least here in Minnesota). Once the filler was dry, the bunker was painted black, and drybrushed from dark grey to white, just like the above piece.
Once the filler was dry, it was sanded down to get rid of any sharp edges or peaks that might be on the piece. A door was made in the front out of card and a handle was taken from a tank model. A thing was glued onto the piece and a couple of straws were also glued on as exhaust ports.
The building was brushed black and drybrushed a dark grey, light gray and finally white. The door, exhaust ports and thing were drybrushed silver. This piece is so stable and strong it wasn't even based.
The second piece is a small bunker I built from offcuts of styrofoam from making hills. It is based on a square of foamcore with masking tape around the edges to hide the foam in the foamcore. The bunker itself is made of "bricks" of styrofoam glued to the base with a removable roof.
The bunker was also coated in wall filler, but a brush was used after application to give the bunker a formed concrete look, much like that on the highways and interstates (at least here in Minnesota). Once the filler was dry, the bunker was painted black, and drybrushed from dark grey to white, just like the above piece.
Labels:
28mm,
40K,
Flying Lead,
Modern,
Sci Fi,
Structures,
Terrain,
Wargaming,
WWII
Statue Bunker
This piece is terrible. I post it now only for completeness, and because some of the technique is interesting.
This was another piece created for my desert terrain set. It is also another piece created from an X-Men playset. I wish more K-Marts would have a 90% off going out of business sale. This tends to be a favorite piece when people see my terrain. Components used in the construction of this piece are:
Foamcore Textured Spraypaint
Cardboard for the base Sand for ground cover
Cross Stitching grid sheet Netting
Styrofoam/ Stryofoam ball Toothpicks
The first thing to do was to disassemble the playset. It was a Statue of Liberty head with a bunch of crazy anti-mutant traps and gizmos inside it. Pretty stupid, actually. I can see why I paid 50 cents for it. I reduced the playset to just the face of the statue and cut it in half at an angle. I then used a dremel tool to distress the features slightly. Using the statue as a guide I cut a base from double corrugated cardboard and sealed the edges with masking tape. The statue was hot glued to the base.
I then used a textured spraypaint (I can't remember the brand or type) and covered the piece heavily. After waiting for eons for it to dry, I base coated it in a brown. Then I highlighted to a light brown into a cream into a light cream color.
The interior floors were made from foamcore sealed with masking tape, and then Cross Stitching plastic (aka Granny Grating) was cut to size and superglued on. a block of styrofoam was used to support the lower floor, and a frame was made out of toothpicks to support the upper floor. After construction, these platforms were spraypainted black (the styrofoam was brushed black first, of course) and everything was drybrushed in a silver. The platforms were glued into place inside the statue.
The base was then coated in a water/PVA mix and then the piece was covered in fine sand. When the glue dried the excess was removed and the process was repeated again.
The cactus was made from a small styrofoam ball used in floral arrangments with toothpicks jammed in and glued into place. The cactus was then painted green, washed black and the spines were painted red.
This was another piece created for my desert terrain set. It is also another piece created from an X-Men playset. I wish more K-Marts would have a 90% off going out of business sale. This tends to be a favorite piece when people see my terrain. Components used in the construction of this piece are:
Foamcore Textured Spraypaint
Cardboard for the base Sand for ground cover
Cross Stitching grid sheet Netting
Styrofoam/ Stryofoam ball Toothpicks
The first thing to do was to disassemble the playset. It was a Statue of Liberty head with a bunch of crazy anti-mutant traps and gizmos inside it. Pretty stupid, actually. I can see why I paid 50 cents for it. I reduced the playset to just the face of the statue and cut it in half at an angle. I then used a dremel tool to distress the features slightly. Using the statue as a guide I cut a base from double corrugated cardboard and sealed the edges with masking tape. The statue was hot glued to the base.
I then used a textured spraypaint (I can't remember the brand or type) and covered the piece heavily. After waiting for eons for it to dry, I base coated it in a brown. Then I highlighted to a light brown into a cream into a light cream color.
The interior floors were made from foamcore sealed with masking tape, and then Cross Stitching plastic (aka Granny Grating) was cut to size and superglued on. a block of styrofoam was used to support the lower floor, and a frame was made out of toothpicks to support the upper floor. After construction, these platforms were spraypainted black (the styrofoam was brushed black first, of course) and everything was drybrushed in a silver. The platforms were glued into place inside the statue.
The base was then coated in a water/PVA mix and then the piece was covered in fine sand. When the glue dried the excess was removed and the process was repeated again.
The cactus was made from a small styrofoam ball used in floral arrangments with toothpicks jammed in and glued into place. The cactus was then painted green, washed black and the spines were painted red.
Skull Piles
These skull piles are hydrostone pieces I picked up at discount from an unknown manufacturer a long time ago. The skulls were simply inked with a Flesh Wash and the ground inked with a Brown Ink. The skulls were then drybrushed a tan to Bleached Bone to a white. The ground was drybrushed a dark brown to a light brown to tan. A bit of my super secret ground cover mix* was attached with white glue and they were done.
* Super secret ground cover mix is Woodland Scenics green fine turf, Woodland Scenics dark green static grass, Woodland Scenics light green static grass, Woodland Scenics light brown fine turf and ground, dried tea leaves. Mix according to taste.
* Super secret ground cover mix is Woodland Scenics green fine turf, Woodland Scenics dark green static grass, Woodland Scenics light green static grass, Woodland Scenics light brown fine turf and ground, dried tea leaves. Mix according to taste.
Labels:
28mm,
40K,
Accessories,
Flying Lead,
Model Kit,
Modern,
Scenery,
Sci Fi,
Song of Blades and Heroes,
Terrain,
Wargaming,
Warmachine,
WHFB
Subscribe to:
Posts (Atom)



















